Legacy Collectibles has your WW2 Walther PPK for sale, whether it's a Nazi Walther PPK or not. Shop our great selection of PPKs online today. Walther Pp Pistol Serial Numbers; Walther Pp Serial Number Chart 1; The PP pictured in the above link was, according to the serial number, one of the first 20,000 pistols produced. Probably late 1929 or sometime in the first quarter of 1930. The series includes the Walther PP, PPK, PPK/S, and PPK/E models. The Walther TPH pocket pistol is a smaller calibre pistol introduced in 1971 identical in handling and operation to the PPK. Various PP series are manufactured in Germany, France and the United States. The Serial Numbers of the pistol subject to this recall are as. It is a Walther PPK serial 429093K. Walther PPK Serial Number Help Get the gun and give me a call if you want and tell me the markings on it. Walther PPK and PPK/S pistols: This recall applies to all Walther PPK and PPK/S pistols manufactured 2009. The Serial Numbers of the pistol. To fill the need for performance in a concealable package, Walther broke the mold of pocket pistols and full-size military pistols to bring undercover officers a more-practical and reliable option, the PPK. It is chambered in.380 ACP, the PPK provides all the power needed in a self-defense pistol without sacrificing on critical functionalities.
The Walther PPK (Polizei Pistole Kriminal) was produced since 1930. It was developed for a hidden carriage. The engineers from Walther reduced the length, width and weight. The main difference to the PP is the frame with no back strap. this function was integrated in a single molded Grip. Also the grip was shortened, so the clip has only a capacity of 7 rounds. The shortness was balanced with a magazine-shoe on the bottom.
The PPK and the PP were also produced very successfully after war. Even James Bond had an Walther PPK.
Technical data:
| Caliber: | 7.65 mm |
| Function: | Blowback; hammer outside; slide catch, double-action |
| Barrel length: | 84 mm |
| Weight: | 580 g |
| Magazine capacity: | 7 rounds |
Production datas (for Wehrmacht only):
Company: | Waffenfabrik Walther |
Location: | Zella-Mehlis (Thüringen) |
Period: | 1940 - 1945 |
Amount: | 26.000 |
Serial numbers: | 270100K - 424619K |
The Walther PPK for the Wehrmacht was split in 3 major variations, according to the army acceptance and finish.
1st Variation (Highpolish-Finish with Army Acceptance E/359; approx. 3.500 pieces)
Characteristics:
Legend: | Walther-Banner Waffenfabrik Walther Zella Mehlis (Thür) Walther's Patent Cal 7,65 m/m Mod. PPK |
| Finish: | high polished Finish, blued |
| Grips: | one piece chequered Bakelit with Walther-banner, brown |
| Serial number: | 6-digits number with suffix 'K' right on frame 3-digits scratched inside of slide |
| Acceptance stamp: | E/359 left on frame E/359 left on slide |
| Test proof stamp: | E/N right on chamber E/N right on slide below ejection port E/N on barrel near muzzle |
The Walther Model 4
by Ed Buffaloe
The Walther Company was founded in 1886 by Carl Walther in the town of Zella St. Blasii, Thuringia, a traditional metalworking and weapon-making area in Central Germany. (The town was renamed Zella-Mehlis after 1919.) The company manufactured rifles and shotguns that were hand fitted, and quickly gained a reputation for superior quality that has remained associated with the Walther name to this day. Three of Carl’s five sons, Fritz, Georg, and Hans Erich, took over the family business after the death of their father in 1915.
In late 1899, the first 7.65mm Browning (.32 A.C.P.) pistol was manufactured by Fabrique Nationale of Belgium, and became known as the Model 1900. Though the Bergmann, Mannlicher, and Mauser pistols preceded it, they were primarily military pistols. The 1900 FN Browning was the first commercially successful “pocket” self-loading pistol. In 1906, FN began production of a 6.35mm Browning (.25 A.C.P.) pistol, which was the first true “vest pocket” semi-automatic pistol. These two guns gained worldwide attention, and almost everyone in the firearms industry began to design pistols for the two cartridges, hoping to cash in on the success and popularity of the Browning guns and cartridges.
By 1908, Carl and his son Fritz had produced prototypes of both a .32 and a .25 caliber pistol. According to some sources, the .32 was designated the Venus-Pistole and had its recoil spring mounted over the barrel, like the 1900 Browning. The .32 Venus-Pistole was never produced. The Walther Company began manufacturing its first .25 caliber pistol in 1910 or possibly 1911, later christened the Model 1. The Model 1 was slightly smaller and lighter than the 1906 FN Browning, but was similar in design, with the recoil spring beneath the barrel and a spring-loaded striker. However, the Walther copied the configuration of the 1900 Mannlicher, with a fixed barrel, the extractor on top of the gun, and the slide cut away in the front to reveal the barrel. Beautifully made and with excellent fitment, the Walther was an instant success, with sales of just over 30,000 by 1915.
The Model 1 was followed by the Model 2 and Model 3, which were simplified in design, used a hammer instead of a striker, and had the recoil spring around the barrel. This last feature may have been influenced by the design of the 1907 Dreyse and/or 1910 Browning. The Model 3, in .32 caliber, actually appeared first in 1913, probably because the company was still selling their existing stock of the Model 1. The Model 2, in .25 caliber, appeared in 1914. The Model 2 was approximately a quarter-inch shorter than the 1906 Browning vest pocket, and more than three ounces lighter. The Model 3 was an inch shorter than the 1910 Browning, three ounces lighter, and held one less round. The Model 3 was only about 2mm longer than the 1908 Pieper Bayard, held one more round, and was more ergonomic in design.
But World War I required a handgun more suitable for military use, and the Walther Company designed the Model 4 as quickly as possible by simply enlarging the Model 3, giving it a larger grip, longer barrel, better sights, and a greater magazine capacity. They were rewarded with an order from the Prussian government in May of 1915 for 250,000 Model 4’s. Some might wonder why a .32 caliber handgun was ordered for military use, when the primary service weapon was the much more powerful Luger 9mm P08 Parabellum pistol. Personally, I suspect that the P08 Parabellum, while powerful and accurate, was finicky about dirt and residue and, being complex to field-strip, was hard to maintain in the trench-warfare environment of World War I. The Walther, while underpowered, was reliable and easy to maintain. Once it was adopted, it rapidly gained the confidence of the soldiers who used it. By the end of World War I--thanks to its government contract--Walther was the largest pistol manufacturer in Germany.
The Model 4 is a relatively simple handgun of blowback design, with a fixed barrel, an external extractor, and a concealed hammer. Its most unusual feature is that (like its predecessor the Model 3) its extractor and ejection port are on the left. The barrel acts as a guide for the concentric recoil spring, which is held in place by a bayonette-type lug that covers the front of the barrel, and by a sleeve at the rear which also serves to cover the spring. When the slide moves rearward, it forces the trigger bar down, disconnecting it from the sear. The safety is a rotating thumb lever that positively locks the cocked hammer. Most safeties have a checkered thumb-grip circle, but a few have circular grooves. There is a screw on the backstrap of the grip that regulates the tension of the flat hammer spring. The gun is slim and elegant, well-balanced, fits the hand very nicely, and points instinctively. It is also reasonably accurate.
My Model 4 is one of the third variant, manufactured just after the war. There is absolutely no play in the fitment of the slide and receiver. The gun tends to shoot a bit high at ten yards, but is spot-on at 25 to 50 yards. The trigger pull is rather heavy and the gun has considerable recoil. Recoil causes the trigger guard to batter my trigger finger, making it sore after a couple of magazines, so I prefer to shoot the gun with a glove on. Nevertheless, the grip fits my hand perfectly and it points better than any gun except the Remington Model 51. The slide does not stay back on the last round, and there is no provision for locking it open. The gun lacks a magazine safety and may be fired without a magazine. The thumb safety is rather clumsy to disengage. Like the ever-popular Brownings, the Walther’s virtues were its simplicity, reliability, accuracy, and quality of manufacture. True sophistication would come later.
In the 15 years of its manufacture, there were four major variations of the Model 4. The dates and serial numbers given below are approximate and subject to revision, pending new information.
First Variant (Very Early World War I production.)
- Sometimes referred to as the transitional model or Model 3/4.
- Approximate serial number range: 29,000 - 34,085*
First Variant
Slide Serrations - Left side of slide marked (in capitals) “SELBSTLADE-PISTOLE CAL. 7,65. WALTHER’S-PATENT” on one line above the Walther banner.
- On the earliest pistols, the right side of the slide was blank. Later pistols had (in capitals) “CARL WALTHER WAFFENFABRIK ZELLA ST.BLASII” on one line. Some pistols were marked “Made in Germany.”
- 12 triangular cut vertical slide serrations up to serial number 34,000, after which 7 angled square-cut serrations.
- Safety lever has circular grooves.
- Partially exposed trigger-bar on left side of receiver.
- Top of slide rounded.
- No rear sight, but had a groove along the top of the slide.
- Triangular or ramped front sight.
- Release for the slide extension/front recoil spring bushing on right front of slide, similar to the Model 3.
- Front portion of frame is squared off.
- Dull blue finish (likely rust blue).
Early Second Variant (World War I production.)
- Approximate serial number range: 35,000 - 45,055*
Early Second Variant
Slide Serrations - Left side of slide marked (in capitals) “SELBSTLADE-PISTOLE CAL. 7,65. WALTHER’S-PATENT” on one line above the Walther banner.
- Right side of slide marked (in capitals) “CARL WALTHER WAFFENFABRIK ZELLA ST.BLASII” on one line, or in rare cases blank.
- 7 angled square-cut slide serrations.
- Safety lever has circular grooves.
- Partially exposed trigger-bar on left side of receiver.
- Top of slide still rounded.
- No rear sight, but had a groove along the top of the slide.
- Most front sights were hemispherical, but a few were triangular.
- Most have no disassembly release catch. A few very early guns still retain the catch.
- Guns with no disassembly release catch have front portion of frame beveled at the bottom.
Late Second Variant (Late war and post-war production, 1916?-1919?)
- Approximate serial number range: 50,014 - 225,056*
Late Second Variant
Slide Serrations - Left side of slide marked (in capitals) “SELBSTLADE-PISTOLE CAL. 7,65 WALTHER’S-PATENT” on one line above the Walther banner. Very late guns have “WALTHER’S-PATENT CAL. 7,65” on one line above the Walther banner.
- Early right side of slide marked “Carl Walther WAFFENFABRIK Zella St.Bl”. Middle period have right side of slide marked “Carl Walther WAFFENFABRIK Zella St.Blasii”. Most guns have right side of slide marked (in capitals) “CARL WALTHER WAFFENFABRIK ZELLA ST.BLASII” on one line, or in rare cases blank, or for very late second variant guns “WAFFENFABRIK WALTHER ZELLA-MEHLIS I”.
- 7 angled square-cut slide serrations.
- Safety lever checkered (though I have noted at least two guns in this range with circular grooves).
- Partially exposed trigger-bar on left side of receiver.
- Top of slide flattened to allow for rear sight. (Early guns, through at least serial number 77233, continue to have the rounded slide, and through at least 67614 have no rear sight.)
- Drift adjustable raised rear sight in a dovetail mount.
- Both hemispherical and triangular front sights.
- No disassembly release catch.
Note: In this period of World War I, Walther was unable to produce enough pistols on their own, so they licensed Immanuel Meffert of Suhl, a well known manufacturer of hunting and sporting guns, to make the pistols. Meffert was also unable to produce enough pistols, so they subcontracted with a number of other firms. Guns made under license by other firms were usually marked on the left side trigger guard bow. Many of these guns have the serial number stamped on the left side of the slide. Some of Meffert’s pistols are stamped on the left side of the slide “Imman. Meffert, Suhl”. Known markings are as follows:
Anchor - Heinrich Krieghoff
AS - August Schuler, Suhl
G - H.M. Gering, Heidersbach
GM - Gebruder Merkel, Suhl (intertwined GM in a shield)
GR - Gebruder Rempt, Suhl
M or IM - Immanuel Meffert, Suhl
|
S&H - Schmidt & Haberman
Third Variant (Post-war production, 1922?-1923?.)
- Approximate serial number range: 229,572 - 261,451.*
- Left side of slide marked (in capitals) “WALTHER’S-PATENT CAL. 7,65” on one line above the Walther banner. Some may be marked only “PATENT CAL.7,65”.
- Right side of slide marked (in capitals) “WAFFENFABRIK WALTHER ZELLA- MEHLIS” on one line.
- 16 fine triangular-cut slide serrations angled forward.
- Sefety lever checkered.
- Internal trigger bar.
- No disassembly release catch.
- Drift adjustable raised rear sight in a dovetail mount.
- Triangular front sight.
Fourth Variant (Limited production, 1924-1929, just prior to introduction of the PP.)
- Approximate serial number range: 252,258 - 266,000 and 480,000 to
500,000.* - The same as Third Variant, except:
- Left side of slide marked (in lower case italic) “Walther’s Patent Cal. 7,65” on one line above the Walther banner.
- Right side of slide marked (in lower case italic) “Waffenfabrik Walther Zella-Mehlis (Thür.)” on one line.
- High polish blue finish.
Note: There is definitely some crossover in serial number ranges between the 3rd and 4th variant.
Disassembly
Walther Ppk 7.65 Serial Numbers
- Remove the magazine.
- Draw the slide back to make sure the chamber is empty and to cock the hammer.
- Press in on the barrel bushing, turn it counterclockwise (as you face the front of the gun), and draw it carefully off the end of the barrel under pressure from the recoil spring. (For the earliest variant, with a hand on the front of the gun to catch the barrel bushing, press down on the latch on the right front side of the slide.)
- Remove the recoil spring and sleeve by twisting them off the barrel.
- Pull the slide all the way to the rear, lifting the front of the slide slightly to get it all the way back, then lift the rear of the slide up and off the rails and pull the slide forward and off the barrel.
Do not pull the trigger with the gun disassembled, as it could damage the lockwork. If the grips are removed from the early models with the external trigger bar, the trigger bar may fall out.
Reassembly is the reverse of disassembly. There is a little trick to getting the slide back on the receiver, but it is best learned by experience. With the slide pulled all the way to the rear, press down on the rear of the slide and push toward the front.
Considering its age, the Walther Model 4 generally holds up very well. J.B. Wood reports that sometimes the hammer spring tension screw on the backstrap will come loose, causing misfires due to light primer strikes. This is easily remedied by tightening the screw. I had the front sight on mine fly off the gun during firing. I bought a bar magnet with a long handle at Home Depot and recovered the sight--it had landed in the dirt behind me.
* I would appreciate hearing from owners of Model 4 pistols. Send me photographs and/or descriptions of your guns along with serial number information. I will try to make the information given here more accurate.
|
Walther Ppk Ss Serial Numbers
|