Dmi Tool Version Nbdmifit 2 14 Download

Posted on by


Window Power Tools. Dr.Salman’s Window Power Tools is a comprehensive PC care utility that offers a one-click approach to help clean, optimize and secure your computer. By using its powerful arsenal of optimization tools Window Power Tools keeps your PC clean, fast and secure. In version 2.10, consumer notebooks will begin using the WINDMIFIT Tool to program DMI. This is a change from 2C 16 Consumer Notebooks, which use the NBDMIFIT to program DMI. As with 2C 16 Consumer Notebooks, 3C 16 Consumer Notebooks will need to be unlocked prior to programing DMI and then locked after the DMI programing is completed. Ray ban sunglasses clarance outlet Too lazy cheap ray ban sunglasses clearance to use teleportation, has very little to own one to enjoy the night view of the city, so a person slowly walking in the street, ray ban sunglasses clarance outlet humming a ditty while ray ban sunglasses clarance outlet constantly shook his right leg and then dig dig his crotch, and ray ban sunglasses clarance. File name: NbDmiFit-2.10-2123.zip Upload Date: 2017-08-22T00:58:59.000Z Size: 12589126 contentcopy This file is hosted at free file sharing service 4shared. Share Facebook Share Google+ Share Twitter. Gather your laptop info: Serial (below battery), SKU (product number), PCID (remove back panel) and System Board CT (look through the holes in the metal plate, its 14 digits from the left to right on a white label). Gather necessary files by googling nbdmifit-2.03.zip (which are the HP dmi fit tools), from the Chinese site.


HP BIOS Configuration Utility (BCU)


DESCRIPTION:

This package provides the HP BIOS Configuration Utility (BCU) for supported notebook, desktop, and workstation models that are running a supported operating system.

VersionSoftPaq #DateOSSoftPaq Exe
4.0.32.1sp10770508/20/2020Windows (7,8,8.1,10)sp107705.exe
*Does not support XP systems that have set the BIOS setup password.

VERSION 4.0.32.1

  • Adds PFX files with passwords on private key
  • Use /setvalue command with a provided password file when BIOS password is set on system
  • Fixes where using /addauthstr on a full repset file containing read only settings causes an error to occur
  • Fixes where BIOS returns a non-zero (fail) result and BCU is incorrectly reporting success
  • Fixes where BCU can set successfully when set the MPM counter to a non-integer value (eg. 5C1)

VERSION 4.0.30.1

  • Adds Support for HP Sure Admin

VERSION 4.0.26.1

  • Fixes an issue where the boot order would be set incorrectly on some systems.

VERSION 4.0.25.1

  • Messaging added to notify the user that a system reboot is necessary for updatted settings to take effect.
  • Fiexes an issue where adding 'Disabled' to a boot option doesn't update correctly in F10 setting.

Dmi Tool Version Nbdmifit 2 14 Download 64-bit

VERSION 4.0.24.1

  • Enhance to automatically add system's boot order value in the BIOS config file. For example: If an additional device added to the system (e.g USB Hard drive) after BCU read, BCU will automatically add this entry under to BCU config file. Note: BCU will ignore to add the device if it is not in BIOS API.

VERSION 4.0.23.1

  • Fixes an issue where the BIOS Configuration Utility does no replace the older BCU version when an update is run.
  • Provides the ability to specify the location to save log files using the /logpath parameter.
    /logpath:'full path' (e.g. BCU.exe /get:repset.txt /logpath:'c:BCUlogsmylog.txt')
  • Provides a warning message when incomplete settings or values for settings are not detected.

VERSION 4.0.21.1

  • Added support for single value get (/getvalue:'setting name') and save it to a file.
  • Fixed BCU crash issue where the BCU config file contains incomplete settings value. BCU now errors out if missing the setting's value and reports 'invalid setting value'
  • Updated with new HPQPwd.exe and HPQPwd64.exe version 1.0.27.1.
  • Re-signed BCU with HP Inc.

VERSION 4.0.18.1

  • Fixed an issue where the BIOS Configuration Utility clears the current BIOS administrator password when the incorrect BIOS password is input
  • Improves the BIOS update installation process

VERSION 4.0.15.1

  • Added support Windows 10.
  • Fixed the issue when setting a blank setting value, BCU no longer stops working.
  • Fixed the issue of BCU stops working when generating repset file with command 'BiosConfigUtility64.exe /getconfig:test.txt /log'
  • Resolved the issue of failing to use parameter/setdefaults to modify BIOS information when BIOS password is set.
  • Resolved getting an operation failed error message when doing a setconfig via BCU, because of adding capability to handle an ordered list with only one item, so it reports it as an invalid value.

VERSION 4.0.13.1

  • Fixed the issue where the 'TPM Activation Policy' and 'TPM Reset to Factory Defaults' settings are not exposed in the repset file.
  • Fixed crashing issue when setting a blank repset file .
  • Fixed crashing issue when setting a repset file in which there is a space in front of last row.

VERSION 4.0.11.1

  • Compiled for Windows 7 and WinPE 3.0 or later, functionality on earlier versions not supported.
  • Deprecated BIOS User support:
    + /CreateUser and /DeleteUser are no longer supported.
  • Config file keyword changed to 'BIOSConfig' followed by file format version '1.0'. Previous keyword 'English' still supported for backwards compatibility.
  • Included HPQPswd utility in the installation
  • Added new commands:
    + /unicode: query if system supports Unicode password and return, intended for batch file use
    + /getvalue: get value of given setting without using config file
    + /setvalue: set value of given setting without using config file
    + /log: generate the log file
  • Added BCU current setup password command line /cpwdfile to match SSM

VERSION 3.2.3.1

  • Removed user guide from installation.
  • Added shortcut to user's guide on web.
  • Fixed failures when enumeration values contained the string 'Disable'.
  • Fixed error when BCU return error code 16 in WinPE 4.0 32-bit.

VERSION 3.0.13.1

  • Removed repair support from Control Panel.
  • Removed clear text passwords from /CreateUser. Replaced by password file.
  • Added comments to setting file when a /getconfig action is performed.
  • Allowed only one /curspwdfile option. Return error 15 if specified more than once.
  • Added /WarningAsErr option to include warnings in final BCU return code. Without this option, warnings are ignored and BCU returns Zero(0=success) if there are no actual errors while writing.
  • Updated help message to match User guide.
  • Updated User Guide to explain: Return code 16; BIOS write stickiness.

VERSION 3.0.3.1

  • Added support for BIOS setup password as an encrypted file. The file name is passed on the command line.
    + Passwords are created with HPQPswd.exe
  • Removed support of BIOS setup password as clear text on command line.
  • Removed support for sending multiple current passwords in a single execution.
    + User may send only one current encrypted password file each time the program is run
  • Changing current BIOS setup password requires providing name of current and new encrypted password files.

VERSION 2.60.13.1

  • Changed message when BCU executes successfully.
  • Added additional return codes when encountering WMI errors:
    + Return code 23: 'System not supported. Unable to connect to WMI HP_InstrumentedBIOS
    + Return code 25: 'System not supported. Unable to connect to PUBLIC WMI namespace
  • Note: Code attempts to connect to following sequence:
    1) Public WMI namespace
    2) HP WMI namespace
    3) HP_InstrumentedBIOS
  • Example: Return code 24 indicates the application has successfully connected to Public WMI namespace but was unable to connect to HP WMI namespace or HP Instrumented BIOS. This condition will exist for non-HP systems and may also exist for HP systems using an outsourced BIOS (example - older entry level home or student platforms).

VERSION 2.60.3

  • Added support for comment lines in configuration file.
  • Added short command line parameters /Get and /Set equivalent to /GetConfig and /SetConfig respectively.
  • Added /SetDefaults option to set the system BIOS settings to pre-set defaults.
    /GetConfig or /SetConfig options are ignored if specified with /SetDefaults.
  • Added installer which copies the utility(both 32 and 64 bit) to program files folder and creates a link to the user guide.

VERSION 2.50.3.1

  • Split from SSM
  • Added 32bit/64-bit Windows 8 support
  • Added 64-bit support
  • Released as a separate SoftPaq
  • Fixed issue where BCU was missing the last setting in /Getconfig.
  • BCU now reports the return value of BIOS call in /verbose mode when reporting success of each setting change.
  • Prior versions attempted to re-read settings for confirmation which could report false failure for a setting requiring a reboot prior to completion.
  • This is a change in the BCU reporting method. BCU will now report success or failure of the request made to BIOS. Any changes requiring a reboot must still occur before the change takes effect.
  • In /verbose mode, when reporting the success of each setting change, BCU now uses the return value from the BIOS call.
  • Previously BCU read back the setting value and compared it to previous value to decide if it was successfully changed. This created problems sometimes when the setting value does not take effect immediately but needs a reboot.
  • Fixed a bug where BCU was missing the last setting in /Getconfig.
  • BCU now reports the return value of BIOS call in /verbose mode when reporting success of each setting change.
  • Prior versions attempted to re-read settings for confirmation which could report false failure for a setting requiring a reboot prior to completion.
  • This is a change in the BCU reporting method. BCU will now report success or failure of the request made to BIOS. Any changes requiring a reboot must still occur before the change takes effect.
  • Added support for ':', '', '?' characters in password.

VERSION 2.15.A

  • Versions prior to 2.50.3 were bundled with SSM and carried the same version number as the SSM version it was with. They are not available as a separate download.

PRODUCT TYPES:

  • Desktops
  • Notebooks
  • Workstations

INSTALLATION INSTRUCTIONS:

  1. Download the file by clicking Download or Obtain Software button and saving the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved).
  2. Double-click the downloaded file and follow the on-screen instructions to extract the contents of the SoftPaq.

HP ELITEBOOK 2560P product information not valid

Kolego, na wstępie programując bios, wykonaj kopię starego wsadu, taka złota zasada na przyszłość. W załączniku zamieszczam program oraz ew. linki do programów, które powinny ci pomóc. HP DMI Tools

  • HP_DMI_TOOLKIT.zip
    • AUTOEXEC.BAT
    • USB Disk Storage Format Tool.exe
    • Readme.pdf
    • Array
Dmi Tool Version Nbdmifit 2 14 Download

Dmi Tool Version Nbdmifit 2 14 Download Utorrent


Download file - link to post

Dmi Tool Version Nbdmifit 2 14 Download Torrent


HP_DMI_TOOLKIT.zip > Readme.pdf

1-USB Stick preparation
Insert the USB stick, it can be a model less or more than 4Go
Launch the hacked 'USB Disk Storage Format Tool'
1- Choose USB stick
FAT or FAT32
2- Check 'Create a DOS startup disk'
Check 'Using internal MS-DOS'
3- Press START button
Once finish, unplug the stick, and plug it again.
From HP DMI TOOLKIT archive, copy Autoexec.bat file and HPDMI folder in the
newly created USB stick
Boot the laptop with USB stick and follow instructions:
2- Using HP DMI tools
Once DOS boot sequence finished you will receive following prompts:
Type keyb xx (replace xx by your country code, eg: keyb fr, keyb uk,...)
and
Type dmifit to launch the HPDMI model recognition tool.
If your HP/COMPAQ model is supported, the appropriate tool will be launched;
otherwise you will receive an error message.
Note: if you know exactly the name of the tool who wants to use, eg: amidedos
type it directly.
Depending of the tool and what do you want to do (change OS SKU,
change serial number....) you will have to navigate in menus.
Once your changes finished, you can power off the laptop.
Note: This toolkit is using NbDmiFit-1.0F distribution with some enhancements:
-EL.bat bugs are fixed
-HPBQ142.EXE tool for Quanta Computers is hacked; the 'Advance Menu' is now
accessible.
-HPBQ193.EXE tool is hacked, for more options in menu.
-AMIDEDOS for HP MINI
By TTAV134


HP_DMI_TOOLKIT.zip > AMIDEDOS.TXT

+---------------------------------------------------------------------------+
| AMIDEDOS - AMIBIOS DMI Editor for DOS |
| Copyright (C)2008 American Megatrends Inc. All Rights Reserved. Ver.1.32 |
+---------------------------------------------------------------------------+
| Usage: AMIDEDOS & lt; DMS File Name & gt; |
| Or |
| AMIDEDOS & lt; Command & gt; |
| Or |
| AMIDEDOS [Option1] [Option2]... |
| ------------------------------------------------------------------------- |
| Commands: |
| --------- |
| /ALL [FileName] Output SMBIOS stringd to screen/file. |
| /DMS [FileName] Create configuration file. |
| /DUMP # [#] [#]... Read Type # data. |
| /DUMPALL [FileName] Output all SMBIOS data to screen/file. |
| |
| Options: |
| -------- |
| /IV [ " String " ] Read/Write BIOS version in Type 0. |
| /ID [ " String " ] Read/Write BIOS release date in Type 0. |
| /SM [ " String " ] Read/Write System manufacture in Type 1. |
| /SP [ " String " ] Read/Write System product in Type 1. |
| /SV [ " String " ] Read/Write System version in Type 1. |
| /SS [ " String " ] Read/Write System Serial number in Type 1. |
| /SU [16 Bytes] Read/Write System UUID in Type 1. |
| /SU AUTO Generates system UUID automatically and update Type 1. |
| /SK [ " String " ] Read/Write System SKU number in Type 1. |
| /SF [ " String " ] Read/Write System family in Type 1. |
| /BM [ " String " ] Read/Write Baseboard manufacture in Type 2. |
| /BP [ " String " ] Read/Write Baseboard product in Type 2. |
| /BV [ " String " ] Read/Write Baseboard version in Type 2. |
| /BS [ " String " ] Read/Write Baseboard Serial number in Type 2. |
| /BT [ " String " ] Read/Write Baseboard Asset Tag in Type 2. |
| /CM [ " String " ] Read/Write Chassis manufacture in Type 3. |
| /CT [1 Byte] Read/Write Chassis type in Type 3. |
| /CV [ " String " ] Read/Write Chassis version in Type 3. |
| /CS [ " String " ] Read/Write Chassis Serial number in Type 3. |
| /CA [ " String " ] Read/Write Chassis Tag number in Type 3. |
| /CO [4 Bytes] Read/Write Chassis OEM-defined value in Type 3. |
| /OS [ & lt; Number & gt; & lt; " String " & gt; ] Read/Write OEM string in Type 11. |
| /SCO [ & lt; Number & gt; & lt; " String " & gt; ] Read/Write Sys. Configuration Op. in Type 12.|
| |
| Note: |
| 1. The expression enclosed by & lt; & gt; means it is a mandatory field. |
| 2. The expression enclosed by [] means it is an optional field. |
| 3. A command without parameter means it is a read command. |
| 4. A command with necessary parameter means it is a write command. |
+---------------------------------------------------------------------------+
To retreive the HP screen at boot for your HP Mini 110,
boot from DOS using this HP DMI TOOLKIT (the " how to " documentation and all necessary tools are inclued).
amidedos /sm " Hewlett-Packard "
amidedos /sp " HP Mini 110 "
amidedos /bm " Hewlett-Packard "
amidedos /bp " HP Mini 110 "
amidedos /cm " Hewlett-Packard "
for serial number,
amidedos /ss " your serial number "
amidedos /bs " your serial number "
amidedos /cs " your serial number "


HP_DMI_TOOLKIT.zip > CSN_HPSetCfg20101119.doc

RELEASE DATE: November 2010 Version: 1.4B
INTRODUCTION
HPSetCfg is a tool that will allow an HP Authorized service partner to
program the Serial Number and Model number on certain HP, Compaq,
Pavilion, and Presario branded notebooks. Please note that the tool is
not supported in Windows.
Platforms Supported:
Compaq: 320, 321, 325, 326, 420, 421, 620, 621, 510, 511, 610, 515, 516,
615
HP Compaq: 2230s, 6530b, 6530s, 6531s, 6535b, 6535s, 6730b, 6730s,
6735b, 6735s, 6830s, 6720t, 2210b, 2510p, 2710p, 6510b, 6515b, 6520s,
6710b, 6710s, 6715b, 6715s, 6720s, 6820s, 6910p, 8510p, 8510w, 8710p,
8710w, nc2400, nc4000, nc4010, nc4200, nc4400, nc6000, nc6110, nc6120,
nc6140, nc6220, nc6230, nc6320, nc6400, nc8000, nc8230, nc8430, nw8000,
nw8240, nw8440, nw9440, nx5000, nx6105, nx6110, nx6115, nx6120, nx6125,
nx6130, nx6310, nx6315, nx6320, nx6325, nx6330, nx7000, nx7010, nx7300,
nx7400, nx8220, nx8420, nx9420, tc4200, tc4400
HP EliteBook: 2560p, 2760p, 8465p, 8460p, 8460w, 8560p, 8560w, 8760w,
2540p, 2740p, 8440p, 8440w, 8540p, 8540w, 8740w, 2530p, 2730p, 6930p,
8530p, 8530w, 8730w,
HP: 420, 425, 620, 625, 4320t, 541, 2140, 4410t, 540, 550, 2133, 2533t,
500, 510, 520, 530
HP Mini: 5103, 5102, 5101
HP Pavilion: ze1000, zt3000, zt3200, zt3300
HP Presario: B1200, M2000, V1000, X1000, X1200, X1300, X1400
HP ProBook: 4230s, 4330s, 4331s, 4335s, 4430s, 4431s, 4435s, 4530s,
4535s, 4730s, 6465b, 6565b, 5330m, 6360b, 6460b, 6560b, 4320s, 4321s,
4325s, 4326s, 4420s, 4421s, 4425s, 4520s, 4525s, 4720s, 5220m, 5320m,
6450b, 6455b, 6550b, 6555b, 6440b, 6445b, 6540b, 6545b, 5310m, 4310s,
4311s, 4410s, 4411s, 44151s, 4416s, 4510s, 4515s, 4710s,
How to Use:
1. Obtain DOS bootable media.
2. Download the zip file to a directory on your hard drive.
3. From that drive and directory, unzip the downloaded file to get the
file HpSetCfg.exe.
4. Copy the file HpSetCfg.exe to the bootable media obtained in step 1.
5. Power on or restart the computer to boot the affected notebook on the
DOS bootable media above.
6. Run HpSetCfg.exe and follow the on-screen prompts to program the
serial and model numbers.
Distribution:
This tool is HP Confidential. Under no circumstances should this tool be
given to a customer directly. This tool is made available to Authorized
HP service partners and self-maintainers through CSN only.
HP Confidential
HARDWARE PLATFORMS AFFECTED:
Compaq: 320, 321, 325, 326, 420, 421, 620, 621, 510, 511, 610, 515, 516,
615
HP Compaq: 2230s, 6530b, 6530s, 6531s, 6535b, 6535s, 6730b, 6730s,
6735b, 6735s, 6830s, 6720t, 2210b, 2510p, 2710p, 6510b, 6515b, 6520s,
6710b, 6710s, 6715b, 6715s, 6720s, 6820s, 6910p, 8510p, 8510w, 8710p,
8710w, nc2400, nc4000, nc4010, nc4200, nc4400, nc6000, nc6110, nc6120,
nc6140, nc6220, nc6230, nc6320, nc6400, nc8000, nc8230, nc8430, nw8000,
nw8240, nw8440, nw9440, nx5000, nx6105, nx6110, nx6115, nx6120, nx6125,
nx6130, nx6310, nx6315, nx6320, nx6325, nx6330, nx7000, nx7010, nx7300,
nx7400, nx8220, nx8420, nx9420, tc4200, tc4400
HP EliteBook: 2560p, 2760p, 8465p, 8460p, 8460w, 8560p, 8560w, 8760w,
2540p, 2740p, 8440p, 8440w, 8540p, 8540w, 8740w, 2530p, 2730p, 6930p,
8530p, 8530w, 8730w,
HP: 420, 425, 620, 625, 4320t, 541, 2140, 4410t, 540, 550, 2133, 2533t,
500, 510, 520, 530
HP Mini: 5103, 5102, 5101
HP Pavilion: ze1000, zt3000, zt3200, zt3300
HP Presario: B1200, M2000, V1000, X1000, X1200, X1300, X1400
HP ProBook: 4230s, 4330s, 4331s, 4335s, 4430s, 4431s, 4435s, 4530s,
4535s, 4730s, 6465b, 6565b, 5330m, 6360b, 6460b, 6560b, 4320s, 4321s,
4325s, 4326s, 4420s, 4421s, 4425s, 4520s, 4525s, 4720s, 5220m, 5320m,
6450b, 6455b, 6550b, 6555b, 6440b, 6445b, 6540b, 6545b, 5310, 4310s,
4410s, 4411s, 44151s, 4416s, 4510s, 4515s, 4710s
OPERATING SYSTEMS AFFECTED: Non-OS Specific

Dmi Tool Version Nbdmifit 2 14 Download Free


HP_DMI_TOOLKIT.zip > Release.txt

Modifications, Enhancements, or Reason for Release:
1. Updates Hpset14B.exe to support new bNB platforms
2. Updates Quanta / Iventec / Foxconn / Flextronics utility to support cNB EEPROM Utility UI SPEC Rev2.6